Advertising

Factory or at an authorized Welch Allyn service center. Related documents When using this manual, refer to the following:. Welch Allyn Connex Vital Signs Monitor 6000 Series Directions for use (part number 103501). Welch Allyn Service Tool CD (part number 103521). Welch Allyn Service Tool Install guide (part number 103820). Welch Allyn Connex Vital Signs Monitor Software Version 2.2X Directions For Use, User Manual, Portuguese Welch Allyn Connex Vital Signs Monitor Software Version 2.2X Directions For Use, User Manual.

English

Quick Reference Guide User Manual Version 2, English For Spot Vital Signs® Monitor Welch Allyn 4200-88E Welch Allyn 4200-88E - McKesson Medical-Surgical McKesson.
Welch Allyn assumes no responsibility for any injury to anyone, or for any illegal or improper use of the product, that may result from failure to use this product in accordance with the instructions, cautions, warnings, or statement of intended use published in this manual.
The Welch Allyn Spot Vital Signs is not intended for continuous monitoring and is therefore not defibrillator proof. Do not leave the device unattended while taking measurements on a patient. The Welch Allyn Spot Vital Signs should not be used on patients who are linked to heart/ lung machines. Page 11: Symbols And Descriptions.

Welch Allyn Spot Vital Signs

Press the Mode (

) button once to save the change. Repeat steps 4 and 5 to set

the day, month, year, hour, and minute values.

Press the Power (

) button to exit the Internal Configuration Mode.

Configuration Menu Options

Setting

Description

Blood Pressure Calibration
Displays “Cal”

Prepares the Spot Vital Signs for calibration. Only qualified personnel should verify the
Spot Vital Signs blood pressure calibration.

Inflation Pressure Preset Level
Displays “PrP”

120, 140, 160, 180, 200, 240, 280 mmHg. Factory default is 160 mmHg.

Pressure Preset Level
Displays “PrP“

On or off. Disables or enables the front panel Pressure Preset button.

Backlight
Displays “BLT”

On or off.

Mean Arterial Pressure
Displays “MAP”

On or off.

Date/Time

Changes or updates the actual date and time.

Welch Allyn Spot Vital Signs Monitor User Manual

Temperature Scale
Displays “TMP MOD”

Fahrenheit (°F) or Celsius (°C) Normal Mode / Fahrenheit (°F) or Celsius (°C) Monitor
Mode

Blood Pressure Units
Displays “BP”

mmHg or kPa.

Battery Readings
Displays “BAT”

Displays the total battery voltage.

Battery Life
Displays “LFE”

Total number unit measurements. Displayed information only; operator cannot change.

Advertising

Popular Brands

Popular manuals

Advertising

English

Set the date and time

After recharging a dead battery or after disconnecting the battery for a few minutes, you
must program the date and time screen.

You can change several device operating parameters in the Internal Configuration Mode.
When changed, these settings become the default power-up settings. You will also see
non-changeable device configurations for technical service purposes.

To enter the Internal Configuration Mode:

Turn the Spot Vital Signs off (

Press and hold the Blood Pressure Start/Stop (

) and Power (

) buttons. The

Welch Allyn Spot Vital Signs Manual

device enters the Internal Configuration Mode and displays the software version.

If the device displays E38, press the Next Patient/Clear/Cancel (

) button to

cancel the error.

Press the Mode (

) button to cycle through the Internal Configuration menu until

you see the date option displayed on the screen.