Eleaf iStick Kiya User Manual Unknown. Eleaf iStick Pico Eleaf iStick pico 25 with ello Eleaf iStick Pico Mega，iStick Pico Mega eleaf istick qc 200w Eleaf iStick TC40W Eleaf iStick TC60W eleaf istick trim eleaf istick trim mod Eleaf Lemo 2 Atomizer Eleaf Lemo 3 Atomizer Eleaf MELO Atomizer Eleaf Pico Eleaf Pico Dual Eleaf Pico. The Eleaf iStick Pico Mega TC - is the bigger version of the Eleaf iStick Pico TC - as such it features a few upgrades among which. It is compatible with both 26650 and 18650 cells; It is updated with a firmware which features a simpler interface for VW mode; The new firmware also brings in a new SMART mode for easy operation - it remembers the last atomizers and setting you already set. Mar 22, 2016 The iStick Pico, just like its name, is preferable, innovative, compact and outstanding (PICO). With a compact size, you can hold it in the palm, much more convenient for usage and portability. Powered by single interchangeable 18650 cell, the iStick Pico. Notice for Use. Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at www.eleafworld.com. Product Introduction The iStick Pico, just like its name, is tiny and exquisite in appearance.

The iStick Pico, just like its name, is preferable, innovative, compact and outstanding (PICO). With a compact size, you can hold it in the palm, much more convenient for usage and portability. Powered by single interchangeable 18650 cell, the iStick Pico also provides you with 75W maximum output and switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes.

Parameter:

Size: 45mm*23mm*70.5mm

Thread type: 510 thread, completely compatible with eGo|510 thread atomizers.
Battery type: removable interchangeable single 18650 battery(continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-75W
Resistance range: 0.05-1.5ohm (TC modes), 0.1-5.0ohm (VW/Bypass mode)
Temperature range: 100－315℃/200－600℉ (TC modes)

Advantage：

1.Tiny and Cute Appearance: With a compact size, you can hold the kit in the palm, much more convenient for usage and portability.

2.TC-SS and TCR Modes Available: Despite the compact size, the iStick Pico allows an intelligent but yet satisfying draw with 75W maximum output and switchable VW/Bypass/TC(Ni,Ti,SS,TCR) modes

3.Removeable Interchangeable Single 18650 Battery: Users can carry spare cells when on the go and change the cell easily by removing the battery cap only.

4.510 Spring Connector:Completely compatible with eGo|510 thread atomizers; It also retains stainless steel spring loaded 510 connector for strong wear resistance and high adaptability.

5.Micro USB Port Charging: The 18650 battery can be charged in the iStick Pico through the side USB port via 1A wall adapter or computer or charged with an external battery charger. The recommended way is to charge the cell externally as it will take less time to give the cell a full charge.

6.Unique Bottom Design: The ventilation holes at the bottom are for better heat dissipation and the adjustment buttons are located at the bottom as well.

How to Use

Power on/off: Screw off the battery cap, put one high-rate 18650 interchangeable battery (positive side down and negative side up) into iStick Pico 75W Box MOD and finally screw on the battery cap. iStick Pico 75W Box MOD can be prowered on/off by pressing the fire button 5 times.

Note:
1. Please make sure you are using a high-rate 18650 battery wholse continuous discharge current should be above 25A.
2. Please be careful not to use battery with torn casing as it is a safety hazard.
3. Before using, please set the wattage within a proper range that the atomizer you installed can work with.

Vaping: Long press the fire button to take a puff.

Stealth on/off: Press the fire button and down button simultaneously when iStick Pico 75W Box MOD is powered on to swith between Stealth On and Stealth off mode. In Stealth On mode, you can vape with the OLED screen off and you can press the fire button one time to see current setting.

Adjustment buttons lock/unlock: Keep pressing up button and down button simultaneously for

two seconds when iStick Pico 75W Box MOD is powered on, then the up and down buttons will be locked and the screen will display 'Lock'. In the same way, the up and down buttons can be unlocked and the screen will display ' Unlock'. Through this operation, you can protect the buttons from unintentional presses and prolong their lifespan.

Swith display mode: Keep pressing up button and down button simultaneously for two seconds when iStick Pico 75W Box MOD is powered off, the screen display will rotate 180 degress. You can view the screen from two different angles through this operation.

Swith vaping modes: When iStick Pico 75W Box MOD is powered on, press the fire button 3 times in quick succession, iStick Pico 75W Box MOD will display current caping mode. Press the up or down button to switch among VW, Bypass, TC-Ti, TC-SS, TCR-M1, TCR-M2, TCR-M3 modes and then press the fire buton one time or stay in the interface for about 10 seconds to confirm the vaping mode you choose.

1). In VW mode:
When set in VW mode, iStick Pico 75W Box MOD can support a coil whose resistance is within the range of 0.1ohms to 3.5ohms.

Adjust wattage: In this mode, the output wattage can be adjusted from 1W to 75W by pressing up button or down button, up button to increase and down button to decrease. Long press up button or down button cn rapidly increase or decrease the wattage level.

2). In Bypass mode:
When set in Bypass mode, the devide can support a coil whose resistance is within the range of 0.1Ohm-3.5Ohm. Direct output voltage system is applied in this mode. The higher the battery level, the higher the output voltage.

3). In TC-Ni/TC-SS/TCR(M1, M2, M3) Mode:
When set in TC-Ni/TC-SS/TCR(M1, M2, M3) Mode, iStick Pico 75W Box MOD can separetely support Nickel 200, Titanium, and Stainless Steel 316 coils. In TCR(Temperature Coefficient of Resistance) mode, iStick Pico 75W Box MOD can support different temperature control coils within different TVR value ranges and you can set the TCR at different values within proper range. (Resistance range of coil: 0.05 Ohm-1.5 Ohm).

The Setting of TCR Mode (M1, M2, M3): When iStick Pico 75W Box MOD is powered off, keep pressing the fire button and the up button simultaneously, then you will enter into the TCR (M1, M2, M3) set menu:
1. Press the up or down button to choose among M1, M2, and M3 modes;
2. Press the fire button one time to confirm the mode you choose;
3. Press the up or down button to increase or decrease the TCR value according to the material of the coil you use;
4. Keep pressing the fire button or stay the interface for about 10 seconds to confirm your setting.

Follow are different TCR value ranges for different coils for your reference:

Note: 1. The TCR value in the sheet is 10 multiplied of the actual TCR.
2. Our total range of TCR value is 1-1000.

Adjust wattage: In TC-Ni/TC-Ti/TC-SS/TCR(M1, M2, M3) mode, the output wattage can be adjusted from 1W to 75W. Press the fire buton 4 times in quick succession to nter the wattage setting menu and press up or down button to increase or decrease the wattage level. Keep pressing up or down button without looseness to rapidly increase or decrease the wa

Eleaf Istick Pico Mega User Manual